IPC Signal Generator & Amplifier | School Science Equipment

PRODUCTS

Click to View Online >>

Click to Request a Paper Copy >>

Click to review us:

Tweets by @BrecklandSS

Breckland Scientific Supplies

IPC Signal Generator & Amplifier

Sold Individually

Price: £269.00

You'll earn 269 points

Availability : Fewer than 2 available
Cat. No.: SNS-260-100

Quantity :

Description

Provides sine, square or triangular waveforms. Frequency selection is by a switched range and continuously variable fine adjustment control. The frequency is displayed on an LED display. All connections are via pairs of labelled 4mm sockets with one of each pair connected to earth. An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish.

Click to open the e-catalogue page >>

Features

Range: 0.1Hz to 100kHz in six decades
Accuracy: �5% on all ranges
Waveforms: Sine, square or triangular. Square wave rise time 1μs approx. Sinewave distortion 1% on all ranges
600W output: Maximum 10V peak to peak
4W output: Power output of 4W available over the entire frequency range for all waveforms. Will drive loudspeakers or other low impedance devices of 4 to 15W
Amplitude: Continuously variable from zero to maximum output
Attenuator: x1, x0.1, x0.01, �5% operating only on the 600W output
Amplifier: Voltage Gain 100
Input impedance: 1MW
Frequency response: 1Hz to 100kHz, -3dB
Output power: 4W into 4W load
Size: 255 x 220 x 110mm

Browse for more products in the same category as this item: